Chamfering machine
Fixed head and movable head

The chamfering machine is composed by a fixed head and a moving head.
Each head had two spindles and each head can reach a production of 30 bars every minute, maximum with chamfer up to o,5 cm.
The standard chamfering angle is 30° and 45° with interchangeable cartridges. It is installed at the entry of the channel.
Technical Data
Type | SM 200 | SM 300 | SM 500 | SM 502 | SM 601 | SM 602 | SM 700 | SM 800 |
Round | 6÷36 | 10 ÷ 50 | 3 ÷ 32 | 10 ÷ 50 | 6 ÷ 25 | 10 ÷ 40 | 20 ÷ 100 | 20 ÷ 100 |
Square | 6 ÷ 27 | 10 ÷ 35 | 4 ÷ 17 | 10 ÷ 41 | 6 ÷ 18 | 10 ÷ 28 | – | – |
Hexagon | 6 ÷ 30 | 10 ÷ 45 | 4 ÷ 19 | 10 ÷ 36 | 6 ÷ 22 | 10 ÷ 35 | 20 ÷ 85 | 20 ÷ 85 |
Bar Lenght | 2.500 ÷ 6.200 | |||||||
Process | Chamfering angle | Facing Chamfering |
Facing ChamferingTaglio |
Facing ChamferingTaglio |
Facing Chamfering |
Facing ChamferingTaglio |
Facing ChamferingTaglio |
Facing Chamfering |
Facing Chamfering |
30° – 45° | |||||||
Max. Production bar/min* | 25 | 23 | 18 | 15 | 50 | 40 | 4 | 4 |
Material type | Stainless Steel – Alloy steel – Brass – Aluminium – Titanium – Copper |